Home - General Resources
 

Measurement Uncertainty References

Measurement
Uncertainty
- Terms
- Uncertainty
- PDFs
  - Gaussian
  - Uniform
  - Triangular
- Procedure
- Combined
- Example
- References
  1. Taylor, John R., An Introduction to Error Analysis: The Study of Uncertainties in Physical Measurements. University Science Books, 1982.
  2. Bell, Stephanie, "Measurement Good Practice Guide: A Beginner's Guide to Uncertainty of Measurement," National Physical Laboratory, Teddington, Middlesex, United Kingdom, ISSN 1368-6550, Issue 2 with amendments March 2001.
  3. Buffler, Andy; Allie,Saalih; Lubben, Fred, and Campbell, Bob; "Introduction to Measurement in the Physics Laboratory: A probabilistic approach," University of Cape Town Department of Physics, 2009
  4. ANSI/NCSL, Z540-2-1997, “U.S. Guide to the Expression of Uncertainty in Measurement”, 1st ed., October 1997.
  5. G103-A2LA, "Guide for Estimation of Uncertainty of Dimensional Calibration and Testing Results", The American Association for Laboratory Accreditation, Dec 2008.
  6. NIST Reference on Expressing Measurement Uncertainty, http://physics.nist.gov/cuu/Uncertainty/index.html
  7. Kennedy, C. W., Hoffman, E. G. and Bond, S. D., Inspection and Gaging, Sixth Edition, Industrial Press, Inc., New York, NY, 1987.
  8. Royal Society of Chemistry, Analytical Methods Committee Technical Brief No. 13, September 2003.
  9. Quantifying Uncertainty in Analytical Measurement”, 2nd edition, Eurachem/CITAC,2000.
  10. NIST/SEMATECH e-Handbook of Statistical Methods, http://www.itl.nist.gov/div898/handbook/, 2006
  11. ISO 5725-1, “Accuracy (trueness and precision) of measurement methods and results – Part 1: General principles and definitions”.

List of Relevant ISO Specifications

  • ISO, “International Vocabulary of Basic and General Terms in Metrology” (VIM).
  • ISO 3534-1, “Statistics - Vocabulary and symbols – Part 1: Probability and general statistical
    terms”.
  • ISO 3534-2, “Statistics – Vocabulary and symbols – Part 2: Statistical quality control”.
  • ISO 3534-3, “Statistics – Vocabulary and symbols – Part 3: Design of experiments.
  • ISO 5725-1, “Accuracy (trueness and precision) of measurement methods and results – Part 1: General principles and definitions”.
  • ISO 5725-2, “Accuracy (trueness and precision) of measurement methods and results – Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method”.
  • ISO 5725-3, “Accuracy (trueness and precision) of measurement methods and results – Part 3: Intermediate
    measures of the precision of a standard measurement method”.
  • ISO 5725-4, “Accuracy (trueness and precision) of measurement methods and results – Part 4: Basic methods for the determination of the trueness of a standard measurement method”.
  • ISO 5725-5, “Accuracy (trueness and precision) of measurement methods and results – Part 5: Alternative methods for the determination of the precision of a standard measurement method”.
  • ISO 5725-6, “Accuracy (trueness and precision) of measurement methods and results – Part 6 Use in practice of
    accuracy values”.
  • ISO/DTS 21748, “Guide to the use of repeatability, reproducibility and trueness estimates in measurement
    uncertainty estimation”.
  • ISO/IEC Guide 33:1989, “Uses of certified reference materials”.
  • ISO/IEC 17025:1999, “General requirements for the competence of calibration and testing laboratories”.